> ## Documentation Index > Fetch the complete documentation index at: https://docs.industrialpmr.com/llms.txt > Use this file to discover all available pages before exploring further. # Dashboard Overview > Master factory view, key performance indicators (KPIs), unit health, and floor activity monitoring. The **Dashboard Overview** serves as the primary situational awareness screen for factory managers, production heads, and floor supervisors. It provides an instantaneous summary of active machinery, edge node connectivity, daily production progress, and factory event logs. ![Industrial PMR Dashboard Overview](https://mintcdn.com/kunji-soft-technologies/TnyhoDiDF9en26mf/images/dashboard-overview.png?fit=max\&auto=format\&n=TnyhoDiDF9en26mf\&q=85\&s=726245d97f268c853dae103e7001b46d) *** ## Master KPI Summary Cards The top section aggregates plant floor production and energy usage across the entire factory for the current active shift: > [card] Total Shots / Strokes > > Cumulative machine cycles recorded across all connected injection molding, stamping, and tufting machines. > [card] Production (Pieces / Meters) > > Total verified pieces produced, dynamically calculated based on mold cavity counts and production multipliers. > [card] Electricity Usage (kWh) > > Cumulative kilowatt-hour consumption measured at machine sub-panels and the main factory incomer. > [card] Raw Material Consumed (g / kg) > > Total resin or feedstock consumed, computed from part shot weight and runner scrap parameters. *** ## Live Units Status & Fleet Health Located on the upper right of the dashboard, the **Live Units Status** widget provides real-time visibility into the physical edge IoT gateway infrastructure: | Gateway Identifier | Machine / Environmental Asset Binding | Network Status | Telemetry Protocol | | :- | :- | :- | :- | | **`UNIT#01`** | Toshiba 350T Injection Molding Machine (IMM-01) | 🟢 **CONNECTED** | MQTT TLS (Port 8883) | | **`UNIT#02`** | Nissei 180T Injection Molding Machine (IMM-02) | 🟢 **CONNECTED** | MQTT TLS (Port 8883) | | **`UNIT#03`** | Haitian 500T Injection Molding Machine (IMM-03) | 🟢 **CONNECTED** | MQTT TLS (Port 8883) | | **`UNIT#04`** | Engel 280T Injection Molding Machine (IMM-04) | 🟢 **CONNECTED** | MQTT TLS (Port 8883) | | **`UNIT#05`** | Aida 110T Mechanical Stamping Press (PR-01) | 🟢 **CONNECTED** | MQTT TLS (Port 8883) | | **`UNIT#06`** | Komatsu 200T Heavy Stamping Press (PR-02) | 🟢 **CONNECTED** | MQTT TLS (Port 8883) | | **`UNIT#101`** | Auxiliary Utilities (Central Chiller & Air Compressor) | 🟢 **CONNECTED** | MQTT TLS (Port 8883) | | **`UNIT#201`** | Plant Floor Ambient Temperature & Humidity | 🟢 **CONNECTED** | MQTT TLS (Port 8883) | | **`UNIT#202`** | Cleanroom Environmental Envelope Monitor | 🟢 **CONNECTED** | MQTT TLS (Port 8883) | ### Edge State Classifications | Status Badge | Criteria | Operational Meaning | | :- | :- | :- | | CONNECTED | Node transmitting active telemetry or heartbeat packets within the last 30 seconds. | Online and up to date. | | RESTORING | Node is back online and uploading buffered data. | Online, but still uploading buffered data. | | OFF | Node disconnected cleanly. | Node disconnected cleanly. | | DISCONNECTED | Node heartbeat has timed out (> 60 seconds without packet receipt). | Node has lost Wi-Fi/cellular connection or power. Onboard SPI flash is buffering records locally. | Each unit also shows **how far behind its data is** and its **MAC address** when known. > [!NOTE] > > How long a unit can be out of contact before it is shown as **OFFLINE** is set per factory in **Settings > General** (3, 10, 15, or 20 minutes). See [Efficiency Method and Offline Time](https://docs.industrialpmr.com/dashboard/settings.md#efficiency-method-and-offline-time). *** ## Stats Card, Charts & Tables > [!NOTE] > > Everything below applies to the factory currently selected in the factory selector. * **Stats card**: production status, supervisor, and the **Units**, **Machines**, and **Equipments** ON counts (for example `5/8`). * **Hourly chart**: hour-by-hour totals for the whole factory, with the **best** and **worst** hour called out. * **Machines graph**, **machines spider chart**, and **equipments spider chart**: compare units side by side. * **SHOW selector**: each chart can switch between **shots**, **production**, **material**, and **electricity**. Meter-based factories show production in meters and hide shots. | Table | Rows | Columns | | :- | :-: | :- | | **Machines** | 5 per page | Machine, Status, Shots, Production, Electricity consumption, Material consumption, Mold running | | **Equipments** | 5 per page | Equipment, Status, Electricity consumption | *** ## Factory Activities Feed Located in the bottom-right panel, the **Factory Activities** feed logs recent machine and equipment status changes. Hover over an entry to see the exact time: * **Operational Condition Events**: * `Supply temperature at 11.8°C` (Auxiliary chiller water feed verified). * `Mold heating temperature stabilization` (Zone thermal equilibrium attained). * `Stamping stroke rate stable at 50 spm` (Continuous stroke consistency achieved). * `Reached 82% quota for Door Trim LH Front` (Proactive milestone notification before job order completion). *** ## Header Controls & Productivity Utilities The top global navigation bar includes quick utilities engineered for factory supervisors: 1. **Global Search (`Ctrl + K`)**: Instantly find a page, machine, equipment, or environment by name. See [Global Search](https://docs.industrialpmr.com/dashboard/access-navigation.md#global-search). 2. **Full-Screen Wallboard Mode (`[ ]`)**: Toggles browser borderless full-screen display for dedicated TV screens mounted on shop-floor control towers. 3. **Dark / Light Mode Toggle**: Switches between high-contrast daytime viewing and eye-friendly dark mode for evening and night shifts. 4. **QR Code Floor Scanner**: Quickly scan an edge node QR code via a mobile tablet camera to navigate directly to that machine's live inspector. 5. **Notification Bell with Alert Badge**: Displays unacknowledged threshold alarms (e.g., phase current imbalance, prolonged idle time). 6. **Multi-Plant / User Profile Switcher**: Switch active manufacturing facilities (for organizations with multi-plant deployments) and manage user account settings. 7. **Get the App**: A QR button opens a modal with a QR code and Google Play / App Store links. See [Login, Roles & Navigation](https://docs.industrialpmr.com/dashboard/access-navigation.md#get-the-app). > [!NOTE] > > For sign-in, roles, breadcrumbs, and the notification bell, see [Login, Roles & Navigation](https://docs.industrialpmr.com/dashboard/access-navigation.md). This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.